DB25 Cable Configurator | Premium Custom Cables
Length Selection
Below you can select the loom lenght.
Mogami Loom Cable Length 8 Way / MeterVanDamme Loom Cable Length 8 Way / Meter
DB25 – Jack TRS 1/4 Neutrik NP3X
Mogami D-SUB DB25 Analog Tascam Standard Multicore | wired to | 8 Channels Neutrik Jack TRS NP3X Male.
This cable is suitable for sound interfaces and mixing consoles, summing outboard gear, Outboard Gear, patch bays like… UAD Apollo, SPL Mixdream, Allen & Heath, Metric Halo, Motu, Focusrite, Antelope, API, Avid, Lynx, etc. These cables are made with Premium Black Neutrik connectors, Mogami 8 Way multicore cable. Beautiful braided, marked channels, tested using multicore cable made and premium studio-grade, industry standards components.
This DB25 TRS cable is a balanced 8-channel Mogami multicore loom fitted with Neutrik NP3X connectors for professional studio wiring. It is designed for interfaces, patchbays, consoles, summing mixers and outboard gear where reliable analog signal routing matters.
Built for clean studio integration, this DB25 TRS cable follows the Tascam standard and offers a practical 1.5m length for tidy rack and desk setups. The loom is braided, numbered, tested and hand made using studio-grade components for dependable balanced signal transfer.
Mogami D-SUB DB25 Analog Tascam Standard Multicore | wired to | 8 Channels Neutrik Jack TRS NP3X Silver/Black
This cable is suitable for sound interfaces & mixing consoles, summing outboard gear, Outboard Gear & patch bays like…
UAD Apollo, SPL Mixdream, Allen & Heath, Metric Halo, Motu, Focusrite, Antelope, API, Avid, Lynx, etc.
These cables are made with Premium Neutrik connectors, Mogami 8 Way multicore cable or Mogami, Beautiful braided, marked channels, tested.
◉ Made using premium studio-grade industry-standard components.
◉ For other loom sizes please send a message request, use the cable configurator, or search the listings for the desired configuration.
Configuration / Features :
◉ DB25 to 8X Neutrik Jack TRS NP3X (Balanced)
◉ Jack TRS 3 Pin NP3X Male. Silver or Black
◉ 1.5 Meter Length
◉ Mogami No.2932 8 Way Loom / Mogami W2932 8 Pair
◉ Premium Neutrik Connectors
◉ Multicore 8 Way / Channels / Pair
◉ Serial Connector Gold Plated Pins
◉ Balanced (by default)
◉ Braided
◉ Numbered
◉ Tested
◉ Custom hand made
◉ Free Shipping
Other studio information & custom configurations available.
◉ Premium Configuration / Studio-grade
◉ International delivery is available.
◉ This is a limited time offer.
◉ Lifetime Warranty.
◉ Diverse configurations are available by request.
|
|
|
|
D-Sun DB25 ( Metal Shell) ,VanDamme Studio Grade Analog Blue Cable , Neutrik TRS / XLR /(Other connectors), Gold plated connectors, braided, numbered, wiring diagram, tested & UK free delivered.
Ultra pure oxygen free copper for outstanding sonic integrity.
Application use:
For the transmission of multiple analog balanced audio signals Recording and post-production equipment interconnects Extremely flexible jacketing materials used Overall diameter mm 9.6 Resistance Conductor Ohm/Km <90 Capacitance Core to core pF/m 100 nominal
--------------------------------
MOGAMI Japan
ELECTRICAL & MECHANICAL CHARACTERISTICS DC Resistance at 20°C
Inner Pair Conductor 0.13Ω/m(0.040Ω/Ft)
Shield 0.031Ω/m(0.0095Ω/Ft)
Capacitance at 1kHz, 20°C (Partial Capacitance Value) See Figure (1) K0 130pF/m(40pF/Ft) K1 12pF/m(3.7pF/Ft)
Inductance 0.6µH/m(0.18µH/Ft)
Electrostatic Noise (Hum Pick-up)* 2.5mV Max.
Electromagnetic Noise at 10kHz* (Inductance of the toroidal core: 595µH) 0.1mV Max.
Microphonics* Method: Stepping on cable 50mV Max. at 50kΩ/ Load
Voltage Breakdown
Must withstand at DC 500V/15sec.
Insulation Resistance at DC 125V, 20°C 100000 MΩ/ × m Minimum
Tensile Strength of one pair (26°C, 65% RH) 274N
Emigration Non-emigrant to ABS resin
Applicable Temperature -20°C‾ +70°C(-4°F‾ +158°F)
Standard UL13 CL2X 60°C / UL 20002 AWM 30V 60°C VW-1
* Using standard testing methods of Mogami Wire & Cable Corp.
